Skip to content
Search for:
Standards for Insulating links
ANSI/CPLSO-14
ANSI/UL2737 (Withdrawn)
ASTM F2973
MIL-L-24410 (Withdrawn)
Tests by Independent Organizations
Load Insulator
Miller & Hirtzer
Search for:
Download
Download Page
Download Right Page
1
2-3
4-5
6-7
8-9
10-11
12-13
14-15
16
Page 9 of 13 CPLSO Procedures for the Development and Coordination of Standards (ANSI Approved: 11th December 2018) Annex C – Procedure for requests for Interpretation of CPLSO’s American National Standards As specified in Section 7, CPLSO does not provide interpretations of its standards. However, suggested changes are accepted for possible adoption in future versions of its standards. This annex provides the specific procedures for consideration of suggested changes. Comments and requests for changes will only be considered in response to a written request sent to the CPLSO Standards Coordinator as shown below (electronic submissions may also be made to the Standards Coordinator at standards@CPLSO.org): CPLSO.X‐20XX (substituting the appropriate standard designation and year for the X values) CPLSO The Marchioness Building, Commercial Rd., Bristol BS1 6TG UK Attention: Secretariat Comments and change requests must be submitted utilizing the following format: Designation: Cite the standard designation, for example, CPLSO.X and the date of ANSI approval. Subject: Cite the application paragraph number(s) and a concise description. Issue: Clearly and concisely state the issue that needs to be addressed (e.g. do values need to be changed, are editorial changes needed, is additional explanation needed, or do requirements need to be added/dropped?). Suggested Change: Optionally state suggested changes to the standard. Requests which are not submitted in this format may not be considered. The CPLSO Standards Coordinator shall maintain a log of all change requests received for an ANS so they may be considered during the next revision cycle.
Page load link
Go to Top